mixer : - 4 multi-input stereo channels: RIAA preamps for turntables on 4 inputs - 3-band total kill EQ: +6dB to off - 2 FX sends: pre/post selection (internal on FX2) - 2 stereo returns - Headphone monitor with mix/cue control: 3.5mm and ¼” sockets - 2 analogue VCF filters: low-pass, band-pass, high-pass, resonance frequency, and filter ‘on’ switch - Assignable LFO with depth control - Mic input: On XLR connector; gain control and 2-band EQ control available - Power supply: High performance internal switch-mode supply - RIAA: for THREE turntables (four via internal jumper link) - Dual Rail VCA Cross Fader USB SoundCard: - Uses 24 bit stereo Analogue to Digital converters and Digital to Analogue converters (not lower spec CODECs - Sample rate can be set to either 44.1kHz or 48kHz; interfaces to any digital audio source up to 192kHz - Soundcard fed from main mix, FX1, or direct from channels - 8 channels - either 6 channels from a PC and 2 returns or 4 channels from a PC and 4 returns. - Sends - mix, FX, or individual analogue channels may be routed to PC or digital outputs MIDI Controller: - Mappable MIDI controls: - 105 MIDI control messages available - 8 x 60mm linear faders - 16 x detented rotary pots - 10 rotary encoders, 50 switches, 2 custom jog wheels with micro switches - 8 illuminated push switches - Multi-function jog wheels with switched navigation control - Xone:3D is compatible with any PC software that has MIDI assignable functions: for instance, lighting controller or visual effects programs |
